Repareer je spullen Gemeenschap Winkel

Model A1311 / Late 2009 / 3.06 or 3.33 GHz Core 2 Duo processor

310 Vragen Bekijk alle

Opties

Inverter compatibility iMac 2308

Hi!

Two iMac EMC 2308 have come into my hands. One of them does not turn on, and another has broken LVDS connector at motherboard

I bought a new LVDS connector to replace the broken one (it has been really complicated to weld with non-professional equipment) and also noticed that inverter board was broken (missing pins for flex inverter cable)

So, I took apart inverter board from the one that does not power on and noticed they are physically identical despite the fact that the reference number is different: one is V267-707HF while the other one is V267-702HF.

I suppose they are compatible, but it takes me to a problem: iMac now boots fine, has image at external monitor but iMac screens remains black with light. All four leds at motherboard are up and internal screens is recognized by OS X. I’m not an expert on repairs so it is very likely problem is on LVDS conector but.. may the image problem be related to inverter instead of video connector?

Any help will be very much appreciated

Block Image

Block Image

Block Image

Block Image

Block Image

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

When it is booted up, if you can discern the desktop while holding a flashlight at an angle to the screen but the screen is dark, that’s an inverter issue.

Was dit antwoord nuttig?

Ja Nee
Score 3

3 opmerkingen:

I’m afraid I can not see anything on screen :(

door

Sadly your LVDS connector and/or the circuitry near it still has issues. If you can take a second image showing more of the area around the connector we might see a missing or damaged component otherwise its the connector will need some attention.

If you had seen a faint image then that would have been the

door

Hi Dan

I know that this soldering is not my best job, sadly my sight is not as it used to be. I have another picture during process

https://photos.app.goo.gl/guwP4LFqRS24wD...

Maybe some day I will feel brave enough to replace connector and try again

door

Voeg een opmerking toe

Voeg je antwoord toe

scallejam zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 2

Altijd: 132