Repareer je spullen Gemeenschap Winkel

Repair information and troubleshooting for Craftsman-brand riding lawnmowers.

551 Vragen Bekijk alle

Opties

blades diaengage and battery dies

Hello, I have a craftman 46 inch pro series riding lawn mower. It wouldn't start even after charging battery. Changed battery, cut 1 acre just fine, midway through the next cut the blades would disengage, engine would rev a little faster and the steering would get tough. Turned mower off and wouldn't start back. Put on charge for about 30 mins, mower started back up, ran for about 10 mins and I repeated the same process 2 or 3 more times until I finished cutting the yard. Any thoughts?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste

Opties

Sounds like the battery is not getting charged. Check across battery terminals with it running at cutting speeds you should be getting 13.5 volts if not then the charging circuitry is to blame..

Was dit antwoord nuttig?

Ja Nee
Score 0

2 opmerkingen:

ok, I will do that tomorrow. If its not reading 13.5 then what in the charging circuitry needs to be replaced

door

battery not charging at all

Also you need to provide model number and serial number info here and at Sears when you order the parts or we will only be guessing otherwise.

door

Voeg een opmerking toe

Voeg je antwoord toe

ryan sparks zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 98