Ga door naar hoofdinhoud

Handleidingen voor fornuizen en ovens op gas of elektriciteit.

177 Vragen Bekijk alle

Is this printed board fixable?

Hi,

My oven's main board short-circuited. For some reasons, the previous owner disconnected the fan which caused it to overheat.

Repair guy quoted $600 for changing the board so I thought I'd ask experts: based on the attached photos, does it look fixable to you? I don't have a deep experience in the matter but it seems like the damage is contained. Looks like it could just be the circuit on the far left side if I'm very lucky.

Any advice would be much appreciated!

Block Image

Block Image

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
2 opmerkingen

what is the make and model number?

door

It's a whirlpool oven. Model number is IBS550PWS00.

door

Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

I’ve repaired many appliance circuit boards over the years, they tend to be under-engineered and fail pretty easily. I guess they enjoy selling you $600 dollar replacement parts or better yet, new appliances.

I’m curious to know what’s on the other side of this board as something got seriously hot to cook the fibreglass like that. From what I can see, one trace has ruptured completely. You could rebuild that trace by jumpering it with appropriate gauge wire and solder it it in place. Assuming there’s no damage to the actual electronics, that might be all you need to do.

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe
Het nuttigste antwoord

This should be your Control Board part:

https://www.repairclinic.com/PartDetail/...

Was dit antwoord nuttig?

Score 2
Voeg een opmerking toe

Voeg je antwoord toe

Nicolas K zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 2

Altijd: 65