Repareer je spullen Gemeenschap Winkel

Released October 24, 2011 / 2.2, 2.4, or 2.5 GHz Quad-core Intel Core i7 Processor

405 Vragen Bekijk alle

Opties

MacBook Pro screen not powering on

My MacBook Pro powers on and charges and works perfectly except the screen does not power on. When I got the MacBook the display powered on and booted to the Apple Logo but then cut off.

If needed I will post pictures of the Logic Board.

UPDATE:

The keyboard backlight is working and i’m at the desktop, it looks like the screen backlight is the only problem because when I use the flashlight I can see the desktop.

I also have a second monitor connected to it and it is mirroring the desktop.

Update (08/05/2018)

Where is the LED driver on the logic board?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
1 Opmerking

Does an external display work? Give that a try.

door

Voeg een opmerking toe

2 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

Sounds like your computer’s dedicated graphics have failed, an issue that is incredibly common with the 2011 15” and 17” MacBook Pros. There is no permanent fix for this besides getting a new computer, however there are some software solutions that can disable the dedicated graphics card, although they are not perfect. Apple had a repair program for these at one point, but that ended over a year ago. The most budget friendly reliable solution would be to get a 15” 2012 non retina MacBook Pro and stick your hard drive in it, or if you are up to it, sticking a 2012 motherboard in yours.

Was dit antwoord nuttig?

Ja Nee
Score 2

1 Opmerking:

The keyboard backlight is working and I’m at the desktop, it looks like the screen backlight is the only problem because when I use the flashlight I can see the desktop.

I also have a second monitor connected to it and it is mirroring the desktop.

door

Voeg een opmerking toe

Opties

Joey, You may have a burnt fuse or the LED driver is gone. Both can be easily fixedly someone who has micro soldering skills and access to the needed parts.

Update (08/05/2018)

LP8550 U9701 which is a 25 bump micro chip

It’s located just below the fan

Block Image

You’ll need a proper rework station with a small nozzle to do this correctly.

Was dit antwoord nuttig?

Ja Nee
Score 1
Voeg een opmerking toe

Voeg je antwoord toe

Joey S zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 96