Ga door naar hoofdinhoud

Released September 25, 2015. Model A1688/A1633. Repair of this device is similar to previous generations, requiring screwdrivers and prying tools. Available as GSM or CDMA / 16, 64, or 128 GB / Silver, Gold, Space Gray, or Rose Gold options.

1969 Vragen Bekijk alle

Black screen water damage

I dropped my IPhone into the toilet I freaked out and grabbed it really quickly and wiped it off. I put it into a bag of rice and thought it was okay so I was using it through the bag. (Horrible mistake) later that night thinking it was all better I plugged it in a started using it like normal. It died so I turned it on the apple screen was on there until it turned green and pink lines untill it turned while and parts of the screen were dimming until the whole screen turned black and it wouldn't turn on again, but if I toggle the silent switch it still vibrates same thing happens when I plug it in. Do I need to buy a new screen or can this be fixed by replacing the battery and what steps can I take to get my phone back to normal?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Een opmerking toevoegen

1 Antwoord

Het nuttigste antwoord


Take it out of the rice. IT DOES NOT WORK This is a myth that really has to disappear. Skip the rice. It is absolutely useless.''' It will not help you fix your phone. All it does is that it provides a false sense of security. It will not clean your phone, it will not prevent corrosion.

Second, stop continuing to try to charge, sync or otherwise use your phone. This potentially can make a bad situation worse.This may further damage your phone. The next thing to do is to clean it. Disassemble your phone using these guides . You must remove all EMI shields. If you do not remove those, you might as well not do anything. After you removed those, clean the whole board, connectors and all with +90% isopropyl alcohol. Follow this guide , and even so it was written for a 3G all the points are still pertinent to your phone. While you clean your board, check for any obvious damage, like burned or missing components etc. When it is properly cleaned, you must replace the battery. All these steps are to avoid delayed failure caused by corrosion. I can not stress the importance of a good cleaning enough, so do it over and over while replacing the alcohol after each cleaning. Do not use compressed air for the cleaning since that can drive liquid as well as corrosion particles into areas that will cause trouble later on. Best thing to do would be to clean it with an ultrasonic cleaner, but if you do not have access to one, this will at least help. Once all this is done, reassemble your phone and reevaluate. Until you properly cleaned your phone you really can’t do a proper troubleshooting. It is entirely possible that your display assembly has failed but at this time this would only be a guess. Even with all this, water damage has only a small chance to be fully repaired, but at least you can give it a try. If this is beyond your capabilities etc. consider contacting professionals like @refectio who specialize in this type of repair.

Was dit antwoord nuttig?

Score 2
Een opmerking toevoegen

Voeg je antwoord toe

Leah._. zal eeuwig dankbaar zijn.

Afgelopen 24 Uren: 14

Afgelopen 7 Dagen: 107

Afgelopen 30 Dagen: 641

Altijd: 2,016