Ga door naar hoofdinhoud

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Vragen Bekijk alle

Where do two rubber spacers go when changing lightning connector?

I changed the lightning connector/headphone jack assembly on my iPhone 6. While putting back together, I noticed one rubber spacer. Slightly triangular shaped in one dimension, and rectangular in another, with a hole through it. I thought I saw it come out from the lightning connector area but nothing seems to make sense in that area. Then I noticed a second one loose. Since performing this task, I cannot type a "y" in the normal orientation. I can only type a "y" if I rotate the phone 90 degrees.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

It's actually on the screw hole on the screen, should not be related to typing problem.

Was dit antwoord nuttig?

Score 2

1 Opmerking:

I spoke to a pro this morning who was repairing my wife's iPhone that had coffee spilled on it. I told him that I replaced the charging/headphone jack assembly showed him what was going on with my keyboard(some characters not working).

He said try disconnecting the screen again and reconnecting it. That took care of the issue. Problem solved! Thank you iFixit.com, and thank you for the advice iPhone Doctor.

door

Voeg een opmerking toe

Voeg je antwoord toe

David Gallegos zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 54