Ga door naar hoofdinhoud

Repair information and guides for the iPhone 6S released by Apple on September 25, 2015. Models: A1688, A1633

2687 Vragen Bekijk alle

Why do I have bad signal with an iFixit Lightning Connector

Hi!

I went through iFixit to avoid having the problem that was reported with using non-genuine parts or knockoffs through amazon of having weak or no cell signal with the antenna.

After installing the iFixit kit, I'm having the issue that I thought buying iFixit's more expensive part wouldn't cause. In places I used to get moderate 4G signal I'm down to 3G and in places where I used to get weak signal I have no signal at all. I can still get 4G in some places but it's rare now.

Is there something that I could have botched up in the phone or do I just need to return and get a new part from iFixit.

Thank you,

Denton

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

3 Antwoorden

Gekozen oplossing

It may not be the lightning connector, since the Cellular Antenna is located on the top portion of the phone which must be disconnected to get to the bottom part of the device. You may want to look at that section and see if the connectors are damaged or if you put the screws in the wrong place.

Step 29-33 for reference

Reinspect your work and let us know. Good Luck!

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

My bad I just realised I put the iPhone 6s as my model. It's just the basic 6.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

I'm pretty sure the antenna is also located in the lightning port flex cable. If after some troubleshooting you think the Lightinng connector flex cable is to blame, you can contact iFixit and ask for a new one under their warranty.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Denton zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 45