Ga door naar hoofdinhoud

Released on September 19, 2014, this 5.5" screen iPhone is the larger version of the iPhone 6.

1466 Vragen Bekijk alle

New display causing white flickering at top of screen


I am replacing the display assembly on an iphone 6 plus. Everything works as normal however at startup the screen would often flicker and sometimes be unresponsive to touch. To be more accurate the flickering was a white lineor band that would rise and fall from the top of the screen and the display would become unresponsive or delayed..

The top flex cable connector to me feels loose compared to the origional.


Beantwoord! View the answer Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

I would be sure this is a problem with the touch ic , not the screen .It is commonly known as touch disease. try lifting screen up while still on and connected and putting a fair amount of pressure on the main board (at the black area on shield below the screen connectors )with your thumb and see if the touchscreen responds while pressure is on.

if so then afraid you would need to have the touch ic replaced . It is expensive and requires micro soldering skill. Best left to professionals that have carried out this particular repair before .

Was dit antwoord nuttig?

Score 3


Totally agree.


I should have mentioned when I put the original screen back on the problem goes away.


You need to try another screen just in case. Sounds like a defective screen.


Voeg een opmerking toe

Voeg je antwoord toe

David zal eeuwig dankbaar zijn.

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 145