Ga door naar hoofdinhoud

Released September 16, 2016. Models A1661, A1784, and A1785. Available in 32, 128, or 256 GB configurations in Rose gold, gold, silver, black, jet black, and (Product)Red.

1364 Vragen Bekijk alle

No celluar signal after phone casing swap

I recently swapped over the phone body for my iphone 7 plus however after completing the swap it does not detect signal at any point, it searches and then just says no signal . I have tried doing a DFU reset and checking all connections on motherboard . Any ideas would be appreciated

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

there are always grounding connections to the housing assuming you have made all those connections correctly and the housing is good quality the only explanation is possible damage caused during the change.

Instead of creating more damage I would take the phone to a decent repair shop ask them to check it for you because otherwise you may cause more damage that cant be repaired.

Was dit antwoord nuttig?

Score 0

1 Opmerking:

Are you able to list all the areas where there are grounding connections?

door

Voeg een opmerking toe

Voeg je antwoord toe

Isaac Legg zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 38