Repareer je spullen Gemeenschap Winkel

Repair information and guides for the iPhone 6S released by Apple on September 25, 2015. Models: A1688, A1633

2687 Vragen Bekijk alle

Opties

Unable to activate Touch ID on this iPhone

Hi, I’ve just tried to replace my rear camera. When I put it all back together and turned it on, it says I’m unable to activate Touch ID on my iPhone. I’ve tried disconnecting and reconnecting the Touch ID at both connectors (one at the home button and the other by the digitiser connector). This hasn’t made a difference. The home button has never been replaced and the Touch ID was working up until now. Home button still functions. How would you go about fixing this problem?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 4
Voeg een opmerking toe

2 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

You'll want to take a close look at the Home Button Flex cable that connects the Home Button, goes underneath the backlight shield and comes back out at the top of the screen. If the flex has a light tear or if the connector is damaged, it will impede the TouchID from functioning properly.

Unfortunately, if that's the problem, the only way to fix it is to replace the screen assembly.

Was dit antwoord nuttig?

Ja Nee
Score 4

1 Opmerking:

I've tried changing the flex cable from the home button, but it still doesn't work. What should I do?

door

Voeg een opmerking toe

Opties

You have damaged the flex cable for the Touch ID sensor or have damaged the connector on the board. Replace the connector and tell us whether it works or not.

Was dit antwoord nuttig?

Ja Nee
Score 0

2 opmerkingen:

Replacing the screen worked fine and the Touch ID works again. Thank you for helping!

door

No problem,mate,glad to have helped!

door

Voeg een opmerking toe

Voeg je antwoord toe

Alex zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 5

Altijd: 14,141