I was following instructions to remove the battery from my Flip Mino Hd. I hadnt used in it years and tried all else to turn on an retrive video. Noticed two wires unsoldered from motherboard during the process, one red, one black. The other two remained in tact. Can I solder them back on and if so, how?
Is dit een goede vraag?
Rep: 781,5k
1,1k
893
2,3k
@fixerchick those are most likely the power leads from the mic. Post some images of your board so we can see which wires are off. Use this guide Voeg afbeeldingen toe aan een bestaande vraag for that. It will allow us to see what you see. Of course, you can also take a look at this image
from here Flip MinoHD Battery Replacement to see if that shows the wires you are referring to.
Yes, those can simply be soldered back to the board. Check videos like this one or this one or this guide Hoe moet je (de-)solderen? to get a feel for what you need to do.
Handleiding
Moeilijkheid:
Moeilijk
Handleiding
Moeilijkheid:
Zeer eenvoudig
—
2 - 5 minutes
Handleiding
Moeilijkheid:
Gemiddeld
—
15 minutes
Was dit antwoord nuttig?
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 1
Altijd: 182
