Repareer je spullen Gemeenschap Winkel

Mid 2012 model, A1278 / 2.5 GHz i5 or 2.9 GHz i7 processor.

1623 Vragen Bekijk alle

Opties

Force SMC reset? maybe?

Hello Guys, im having some problems with this Mac...

After replaced RAM, HDD for a SDD and Trackpad... the computer only turns on when connected to power source, the power button is not working, and the battery is not getting recognized...

im trying to smc reset it, but since the power button is not responding... I can't get it to work...

alsooo... I have looked some workaround using rEFIt, but I can't get it installed and activated also...

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 1
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

If the battery symbol shows an X, you have likely shorted the pins when disconnecting the battery (usually with a metal tool), which will send battery voltage to the SMC. This will kill this section of the SMC, preventing it from recognising the battery. The SMC will need to be desoldered, reballed and soldered to your board, pulling it from a board of the same model and year as yours. Replacing the logic board is also an option.

With the power button issue, you have either damaged the keyboard cable when disconnecting it (either slightly ripped/poked a hole in it, or bent the corners of the cable), not connected it properly, or this is related to the SMC also.

Was dit antwoord nuttig?

Ja Nee
Score 2
Voeg een opmerking toe

Voeg je antwoord toe

jbermudez27 zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 533