Ga door naar hoofdinhoud

Reparatiehandleidingen en ondersteuning voor afwasmachines.

702 Vragen Bekijk alle

Dishwasher leaks underneath when pumping - drain valve housing?

Our Kenmore Elite dishwasher is leaking steadily from underneath while pumping. Just started a few days ago - unit is 3 yrs old. It seems to be leaking from the valve/drain flange/ housing on side of motor/pump cylinder at bottom center of unit. Is that flange/valve housing removable and serviceable?

Update (02/25/2018)

The dishwasher is a Kenmore Elite Ultraclean Model 665.1279, purchased in May of 2015.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 2
2 opmerkingen

We have this same model. It leaked and caused damage to our wood flooring, cabinetry.

door

It’s only 3,years old and our warranty expired in July 2018

Urrrr! Maddening

door

Voeg een opmerking toe

1 Antwoord

Het nuttigste antwoord

@bags take a look at the float gasket and see if that is where it is leaking from #11 in illustration

Block Image

Other possibilities are the drainhose #15 or the sump and seal assembly #4

Block Image

Once you get to those parts, post some images with your question so that we can see what you see. Use this guide Voeg afbeeldingen toe aan een bestaande vraag for that.

Was dit antwoord nuttig?

Score 2
Voeg een opmerking toe

Voeg je antwoord toe

Mark zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 2

Altijd: 1,703