Ga door naar hoofdinhoud

Wi-Fi only version of Apple's 2nd generation iPad Air. Model A1566.

211 Vragen Bekijk alle

LCD Horizontal white and black lines

Block Image

Replaced battery, worked for 2-3 days then battery stopped taking charge.

Opened up again to disconnect and reconnect battery - iPad appear to now boot up again but LCD is only showing lines (see images).

Tried to fiddle with flatwire and connector to see if these is a glitch - not even a flicker on LCD to indicate anything.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 2
Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

I would suspect that the LCD is damaged. It could be just a small tear in the flex, damage to the connector or a logic board issue.

If you have access to a known-good Air 2 screen assembly, then you could use that to eliminate an important variable. Unfortunately, the Air 2 screens are in short supply and very expensive.

Start by inspecting the flex and connectors under magnification, then move onto the logic board, specifically the area around the LCD connector to see if there are any dislodged components.

Was dit antwoord nuttig?

Score 2

1 Opmerking:

Thanks Minho - will do

door

Voeg een opmerking toe

Hi..Did u figure out why it was so because I am in the same situation

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Lars McKie zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 3

Afgelopen 7 dagen: 9

Afgelopen 30 dagen: 57

Altijd: 3,260