Ga door naar hoofdinhoud

Discover repair information including guides and tips for Whirlpool Refrigerator Repair. Our comprehensive resources offer detailed instructions for troubleshooting and fixing common issues in various Whirlpool refrigerator models. From simple fixes to more complex repairs, these guides are designed for both novices and experienced technicians. Learn how to diagnose problems, replace parts, and ensure your Whirlpool fridge operates at peak efficiency. Whether it’s a water dispenser malfunction, inconsistent cooling, a bad ice maker, or unusual noises, find step-by-step solutions tailored to your Whirlpool appliance.

75 Vragen Bekijk alle

Fridge leakage in freezer and underneath

I have a Whirlpool gold 3 door refridgerator that leaks water into the freezer and the floor. I turned off the water supply for the ice maker.

Every other week I have to break about 2 inches of ice out of freezer to keep it from leaking onto the floor. How do I fix this problem. The refrigerator isn't very old but past the warrenty. Can't seem to find where it's coming from.

What can I do?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 3
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

Cause 1

Clogged or Freezing Defrost Drain

If the defrost drain is frozen, the water will overflow the drain trough and drip down to the bottom of the compartment. This water can eventually leak onto the floor. Check the defrost drain to determine if it is clogged or frozen. If the defrost drain is frozen, thaw the ice. In addition, flush the drain with hot water to ensure that it is clear of debris.

Was dit antwoord nuttig?

Score 1

4 opmerkingen:

I have the same problem, except I have checked and it is not a frozen drain. The ice machine bar stops short from ice buildup, but does not stop the water flow into the tray as it cycles. I have replaced the entire motor and tray system and still have the problem. Any further suggestions?

door

Lenard If water still flows into the ice trays with the bat up, then the bat is not activating the valve or the valve is defective

door

Yes, water still flows into ice tray. The level arm does not complete it's cycle. It appears to get stuck as cubes fill the sup ply bin near completion of filling the bin .

I guess it doesn't meet the needed resistance to shut off the valve, or it sends a signal to the valve, which might be defective? ??? I will try to replace the valve and see if it helps .

door

Thanks for your help!

door

Voeg een opmerking toe

Voeg je antwoord toe

Jeanne zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 17

Altijd: 16,030