Ga door naar hoofdinhoud

Released September 16, 2016. Models A1661, A1784, and A1785. Available in 32, 128, or 256 GB configurations in Rose gold, gold, silver, black, jet black, and (Product)Red.

1364 Vragen Bekijk alle

After screen replacement iPhone will not turn on even with old screen

I replaced my iPhone 7s plus screen due to cracking . My old screen still works just cracked . powered off phone installed new screen . Won't turn on reinstalled original screen still won't turn on. My 3rd time replacing never had a problem be for .

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

You say the phone won't turn on...have you tried to see if iTunes recognizes your phone?

Connect your phone to an iTunes enabled computer. If the phone is recognized, then shine a bright light on the screen. If you can see a dim image, then your backlight is the issue.

You mention that you disconnected the battery prior to removing or re-connecting the screen. Normally not doing this can cause the backlight circuit to fail. If you did disconnect the battery, the problem may be elsewhere however given that neither the replacement screen, nor the original screen work, the backlight circuit is still the likely problem. This would require a micro-soldering repair and is not DIY.

Was dit antwoord nuttig?

Score 2
Voeg een opmerking toe
Het nuttigste antwoord

Did you remember to disconnect the battery before the repair? iPhone 7 Plus Vervanging van het scherm

Did you remember to plug everything in?

Was dit antwoord nuttig?

Score 2

1 Opmerking:

Yes . There is only 3 .

door

Voeg een opmerking toe

Voeg je antwoord toe

Bobby zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 3,170