Repareer je spullen Gemeenschap Winkel

iPad Air Wi-Fi + Cellular, model no. A1475. Available in Space Gray or Silver, with 16/32/64/128 GB configurations.

125 Vragen Bekijk alle

Opties

New glass lifting where the cables sit

Hi all. I have never had this problem with other models of iPad, but I keep having problems with the new digitiser lifting around the area where the cables sit. I have tried different things like poking the cables in just before closing that side, I’ve used small clamps to hold for 2 days and it still lifts! I’ve removed the pre installed adhesive and used strong Tesa tape instead.

I’ve tried new screens from different manufacturers and I still have the same results.

What can I be doing so wrong?!

Any tips would be appreciated.

Thanks

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

Try using B7000 liquid glue, you may have better luck with that.

Was dit antwoord nuttig?

Ja Nee
Score 2

4 opmerkingen:

Thanks. Do you use that with the double sided adhesive, or remove that and use the glue instead of? Also, how does it affect removing the screen in the future should it need another repair?

door

With the adhesive, that glue is mallable so It's not like super glue it's fairly easy to remove if you don't use too much in a spot.

You can rub off the excess with your hands easily. Takes like an hour or more for it to set in.

door

Ok thanks I’ll give that a try. It’s a little strange to me though as surely you shouldn’t need glue?! I’ve ordered myself a tube of the glue so I’ll see how I get on

door

Voeg een opmerking toe

Voeg je antwoord toe

Dominic Haywood zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 110