Repareer je spullen Gemeenschap Winkel

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Vragen Bekijk alle

Opties

iPhone 6 turns on but has no image after replacing battery.

Today we replaced the battery and home button in my Iphone 6 and it worked for a few hours until later the screen came up with white and green stripes and then faded to black. However the phone is still on as it still rings and charges and there is a very dim light.

There is no image on the screen at all, not even under a flashlight. Just illuminated black.

Anyone got any ideas?

Ive researched it and so far I think it could be an issue with the connectors perhaps?

Thanks

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
1 Opmerking

Try unplugging all the connectors again (lcd, digitizer, prox sensor and home button) and plug them back in and make sure they are plugged in correctly, also make sure the fpc connectors on the board are not damaged (it will be better with a microscope)

door

Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

Try another screen and then try with the home button unplugged, I've had faulty screen cause these type of issues.

If the old screen works, try that one again.

Was dit antwoord nuttig?

Ja Nee
Score 2
Voeg een opmerking toe

Voeg je antwoord toe

Lou Voller zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 71