Ga door naar hoofdinhoud

Repair information and guides for the Apple iPhone 5s that was announced on September 10, 2013. Model: A1533, A1453, A1457, A1528, A1530, A1518

3530 Vragen Bekijk alle

Wifi Antena - proper adhesive replacement.

Hi,

I want to buy a replacement wifi antena for an iPhone 5S. All the antenas i received so far were either damaged, or the silver adhesive (indicted by arrows in the photo below) has gaps. Can this be replaced?

Block Image

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

That's a sign that the antenna was pulled from a phone. Personally, I don't think that missing a bit of the conductive adhesive will make a difference for an individual phone. Sure, when you're mass producing tens of millions of phones, everything has to be perfect to get high yields. But this should work fine. You can check out sites like Union Repair, they may sell this adhesive.

Was dit antwoord nuttig?

Score 2

3 opmerkingen:

would you be willing to provide some idea about what this adhesive is called? It looks as if it has some metal particles inside, defnitely more than a simple glue.

door

If you look here, you will see that the replacement part they sell has the special adhesive. They don't sell the adhesive on its own though. iFixit does sell some pre-cut conductive adhesives but not for the flex in question. You could always cut it to shape.

door

Indeed. I bought from several places where the part looked like that when advertised, but upon arrival it was like in the photo have pasted.

door

Voeg een opmerking toe

Voeg je antwoord toe

Mateusz Lacki zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 69