Ga door naar hoofdinhoud

Repair information and guides for the iPhone 6S released by Apple on September 25, 2015. Models: A1688, A1633

2683 Vragen Bekijk alle

Phone won't turn on after I opened it up

Just a little while ago I got very upset and decided to throw my phone to the wood floor kinda hard. It had a little case that just covers the back and thats the part that hit the floor but when I picked it up, only half the screen was working, the other half showing vertical lines. I looked it up and decided to open the phone up because I had a Scanditech kit I used with my iPhone 5 and i opened the 6s up and disconnected and reconnected the cables and now the phone won't even turn back on but it was recognized on iTunes but I can't restore it because "i need to enter the password" but i can't do that as you can probably tell. I need help but I'll end up going to the store tomrorrow to get it fixed at the place I bought it

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

You probably damaged your LCD when you threw the device. You'll want to pick up a new iPhone 6s LCD and repair it: iPhone 6s LCD and Digitizer

iPhone 6s LCD and Digitizer Afbeelding

Product

iPhone 6s LCD and Digitizer

$69.99

Was dit antwoord nuttig?

Score 2
Voeg een opmerking toe

As Mat said, you probably damaged the LCD, But you may have burnt the Backlight Circuit if you did not turn it off or unplug the battery before removing and putting the screen back on.

Check it using a flashlight on the screen while powered up and see if you can see the screen (Faint Image) with the flashlight or if it is entirely black and blank.

Was dit antwoord nuttig?

Score 2
Voeg een opmerking toe

Voeg je antwoord toe

Loner GND zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 94