Model A1224 / Mid 2007 and Early 2008 / 2, 2.4, or 2.66 GHz Core 2 Duo processor

580 Vragen Bekijk alle

Hard drive fan part no

Hi all,

Have sluggish iMac. Beach ball spins most of the time and it takes an age to to anything.

I've run the Apple Hardware Test and get a

4MOT/1/40000003:HDD-1447 error. Reading on the Apple support forums suggests its a Hard drive fan problem rather than the Hard drive itself.

Can anyone tell me the part number for a new fan?

Cheers

Beantwoord! View the answer Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Een opmerking toevoegen
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12

4 Antwoorden

Gekozen oplossing

There are conflicting reports on what this error means. To help identify it download a free program called Temperature Monitor: http://www.bresink.com/osx/TemperatureMo...

Next download and run SMC Fan control: http://www.macupdate.com/app/mac/23049/s...

Try to find out if it's a fan problem or a overheating hard drive problem.

Was dit antwoord nuttig?

Score 3

Commentaar:

The fan part number is probably 822-8154. But to be sure please give the last three letters of your serial number to make sure I have he right machine.

door

Een opmerking toevoegen

Thanks Mayer. Appreciate the help.

If after running these tests I find it is the fan, do you know the part no. ? I'd rathe get the part before opening up the Mac.

Was dit antwoord nuttig?

Score 0
Een opmerking toevoegen

Hello, I have this error aswell. But no numbers after: 4MOT/1/40000003:HDD

It's just that. I installed thethe fan control program, they seem to be alive. and the the highest temperature was 60C. My system still freezes. The last three letters of the serialnumber are x87. Do you have any idea perhaps?

Was dit antwoord nuttig?

Score 0
Een opmerking toevoegen

What happened to you as of today?

I'm getting the same error with AHT, in fact my hard disk died today.

Yesterday I managed to get SMC Fan Control working, and reported that the HDD fan was running over 1500 rpms, so I take for granted that is ok :(

Was dit antwoord nuttig?

Score 0
Een opmerking toevoegen

Voeg je antwoord toe

JamesT zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 4

Altijd: 1,775