How to adjust the carburetor

Usually removing aircleaner allows access.

If it has thumb screw at bottom of bowl,,

This is the main jet,,

Idle jet screw is small,

Inserted at side of carb,,

But now actually,,

one should pull the bowl off to

make sure no water and corrosion

Are Present,,

Using carb cleaner spray,

inserted in jet screw holes to flush out

and debris.

Counting turns in first, should give you

base where to start when back together.

Note: To protect fuel problems,

Stop at any Artic Cat parts/service centers

They have the best inline clear fuel filters.

I Add them to every power product.

Let it loop down below float bowl level,

you'll be able to see when a few drop of water stay

trapped, just blow it out,, good to go.