Repareer je spullen Gemeenschap Winkel

Reparatiehandleidingen en ondersteuning voor alle huishoudventilatoren.

207 Vragen Bekijk alle

Opties

Why can't I remove the blade cap from my Living Solutions stand fan?

I bought a Living Solutions stand fan. It has all the pieces, but it came with the blade cap firmly attached to the motor shaft, and I can't seem to get it off so that I can properly assemble the fan.

I have tried holding the motor shaft with a towel and with a rubber jar-lid remover so that I could try to screw off the blade cap, but it isn't moving no matter what I do!

Getting that off is all that is preventing assembly and I can't find any answers to this on the manufacturers page or find a customer service # to call.

Thanks!

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 2
11 opmerkingen

Would you give us a model number?

door

Thanks so much Philscbx!!!

Exactly the solution!

I would never have guessed that. EVERYTHING seems to have right hand threads.

Appreciated!!!!!!!!

door

You're very welcome,,

It's Fun when it works @!

door

Good gracious I was having the SAME issue until I found this post! šŸ˜‚ So glad I didnā€™t break it by forcing it the opposite way for 20 minutes! Thank you guys so much. Iā€™m still laughing at us!

door

I still don't get it.I've tried turning it to the left and nothing happens. I cannot get that off.Can someone please tell me what I'm doing wrong?

door

6 commentaren meer tonen

Voeg een opmerking toe

2 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

Very Possible

Left Hand Threads.

This a mean trick used by Chrysler back in the 60's

For Lug nuts.

Good Luck

Was dit antwoord nuttig?

Ja Nee
Score 3
Voeg een opmerking toe

Opties

WOW! I had the same problem with a Comfort Zone oscillating fan and found this solution! Unbelievable! Left-hand threads! As soon as I switched to the left hand, the cap loosened like it was supposed to with great ease! What is the origin of this ā€œtrickā€ again? Was Chrysler the only one engaged in this trickery of mechanics? LOL Thanks for the support!

Was dit antwoord nuttig?

Ja Nee
Score 0

1 Opmerking:

Left hand thread means that the threat travels from the right to the left. From the top of the bolt or nut towards the shoulder. You don't physically have to change hands. Anti clockwise and not clockwise it stops things coming loose when they turn a specific direction. This is common with rotating items.

door

Voeg een opmerking toe

Voeg je antwoord toe

sadiepix zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 5

Afgelopen 7 dagen: 76

Afgelopen 30 dagen: 265

Altijd: 19,866