Ga door naar hoofdinhoud

Handleidingen en ondersteuning voor allerlei TV's.

8984 Vragen Bekijk alle

TV will not turn on. No LED.

Panasonic TC-P50S30

I have replace the Power board, still nothing. I am getting 10 volts on P6 (it says 5v on the board), and I am getting 10 volts to the switch. Still it will not turn on. What next?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0

1 Opmerking:

The voltage is actually 5v (I didn't notice the doubler was switched on).

door

Voeg een opmerking toe

1 Antwoord

Have you tried checking the outlet?

Was dit antwoord nuttig?

Score 0

3 opmerkingen:

If you are referring to the wall receptical, yes. There is also 120v at the connecter on the power board. There is also 5v at the standby pin on the main board. I can find no fault with the power board, and I have also replaced the board, still no start or standby led. I have just ordered another main board, and I'll keep you posted.

door

Got another main board, and the tv powers up, but the picture is horrible. Brights are whited out, and the darks are blacked out.

door

I sent that Main bd. back and got another one from another vendor. TV works fine and the picture is as outstanding as it ever was. Problem solved!

door

Voeg een opmerking toe

Voeg je antwoord toe

Al Burr zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 86