Ga door naar hoofdinhoud

A Samsung Series 3 PC, the NP300E5C-A09US is a 15'' laptop with a 1366x768 screen resolution. It is a great choice for anyone looking for a lightweight, yet powerful portable computer.

18 Vragen Bekijk alle

How can I fix my laptop logo/boot loop?

When I start up my laptop the samsung logo comes up and after a few seconds goes to a black screen and a few seconds later it goes back to the logo and it keeps repeating this forever. I have tried many of the common BIOS keys and none of them brought up anything.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 2
2 opmerkingen

Have you tried to use a usb with a bootable window?

door

Hi!

I have the same problem, and with some googling, it came out that the NVRAM (which is located in the bios) is corrupted. (In my case, it corrupted when I installed linux, as documented on many forums.) Unfortunately, the only fix is to buy a new bios chip and replace it.

door

Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

Take out battery:

Samsung NP300E5C Battery Replacement

Try resetting BIOS:

https://www.youtube.com/watch?v=UXDZXDif...

I would ignore the desoldering part and just remove the CMOS “coin” battery, to the right ,top of video before where he does the desoldering.

This will help with disassembly - clearer than video:

Samsung NP300E5C-A09US Motherboard Replacement

Samsung NP300E5C-A09US Battery Afbeelding

Handleiding

Samsung NP300E5C Battery Replacement

Moeilijkheid:

Zeer eenvoudig

1 minute

Samsung NP300E5C-A09US Motherboard Afbeelding

Handleiding

Samsung NP300E5C-A09US Motherboard Replacement

Moeilijkheid:

Gemiddeld

20 minutes - 1 hour

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

Hi @gcb140

My bet is your Hard Drive is having problems. You can try to reinstall windows using a recovery disk but if it continues to fail, you may need to replace the Hard Drive.

Was dit antwoord nuttig?

Score 0

2 opmerkingen:

I am having the same problem but after I replaced the hard drive and RAM. Boot loop, won't even POST, can't get into BIOS. Won't boot from DVD drive or Hiren's through USB.

door

After you've replaced the Hard Drive, you will need to reinstall an Operating System for the computer to recognize the Hard Drive as a boot device. Follow these instructions to start the process:

https://community.spiceworks.com/how_to/...

You will need a bootable flash drive with your Operating System installer on it to reinstall successfully.

door

Voeg een opmerking toe

Voeg je antwoord toe

Grant B zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 6

Afgelopen 30 dagen: 36

Altijd: 3,142