Ga door naar hoofdinhoud

iPhone 7 freezing after screen repair

Hi, i work at a phone repair shop and i constantly have iPhone 7s that come back with a problem where they will be using the device and randomly the screen will freeze and they will have to shut it off and turn it back on. It only starts happing after the repair. was curious if this is a known problem and if it could be a repair oversight or faulty parts?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 4
Voeg een opmerking toe

7 Antwoorden

Het nuttigste antwoord

I have brought this to the attention of many parts suppliers and this link will give you everything you need to know. This is why apple has a calibration machine, The iPhone 7 through 8 plus will experience this due to 4 separate manufactures of screens, LG, Toshiba, Sharp, and JDI. If your screen does not match that it will need to be calibrated with the machine or it will not communicate properly. Best solution is to check the first 3 characters on the screen and try and find one that matches the original.

'''https://webuylcds.co.uk/2018/05/15/to...

Was dit antwoord nuttig?

Score 3

1 Opmerking:

Or use eprom reprogrammer for 50$

door

Voeg een opmerking toe

Restart your iPhone 7(press and hold power button and volume down untill you see the Apple logo),if this still not work, backup your iPhone and do a factory reset.

Was dit antwoord nuttig?

Score 1

1 Opmerking:

It worked. Thank you.

door

Voeg een opmerking toe

Sounds like a screen quality issue. Have you tried different screens?

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

i also work at repair shop and having same issue , dont know what is it yet ................

annoying thing is customer are having problems because of my service :(

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

If each time it's the same thing, it's due to bad quality LCD. Buy a new lot of LCD.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

My screen is on, but it doesn't respond when you tap, slide, or try other gestures. Wont even let me slide the power button off nor let me enter my passcode. Could i just need a whole new screen?

Was dit antwoord nuttig?

Score 0

1 Opmerking:

You need new screen

door

Voeg een opmerking toe

Please don’t read comments from others… EPROM reprogramming needed. This is the only real and working solution. Costs 50$


https://www.youtube.com/watch?v=Uv4BDpWf...

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Arima zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 4

Altijd: 3,806