Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

The Apple iPhone 5s was announced on September 10, 2013. Repair of this device is similar to the previous models, and requires screwdrivers and prying tools. Available as GSM or CDMA / 16, 32, or 64 GB / Silver, Gold, and Space Gray.

4019 Vragen Bekijk alle

Home button loose after screen replacement

I had my iPhone 5s front panel assembly replaced because of glass damage and now the home button rocks in it's place. Seems like there may be a gasket or seal missing now. I have done a ton of googling and I can't seem to visually identify what might be missing from the home button assembly.

Beantwoord! View the answer Dit probleem heb ik ook

Is dit een goede vraag?

Score 2
Voeg een opmerking toe

Manta schroevendraaierset

112 bitjes voor elke reparatie.

Upgrade Your Toolbox

Manta schroevendraaierset

Upgrade Your Toolbox

2 Antwoorden

Gekozen oplossing

@efb115,Erik, Home button rocks. This could be because of bad/missing gasket or the button bracket not installed correctly. Below are links for replacement parts(bracket 1st link, gasket 2nd link) and also guides/vids to help open the device to check and make repair. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.

iPhone 5s/SE Home Button Bracket

https://www.fixez.com/iphone-5s-home-but...

iPhone 5s Home Button Replacement

https://www.youtube.com/watch?v=2NZgucac...

https://www.youtube.com/watch?v=SD_6oVXX...

iPhone 5s/SE Home Button Bracket Afbeelding

Product

iPhone 5s/SE Home Button Bracket

$5,99

Was dit antwoord nuttig?

Score 4

Commentaar:

Yeah, the first thing I did was remove and reassemble the home button assembly and that didn't fix it. That black gasket is still there, but is there another adhesive pad or ring that goes between plastic button and the button sensor on the cable?

door

Erik Brandt, By the looks of the 1st and 2nd video link provided, the replacement gasket should have adhesive on both sides perhaps, the vids. show all parts used when install of home button.

door

The adhesive on the black home button rubber gasket has weakened / separated (probably on the old screen).

To fix this issue you will need to actually replace the current rubber home button gasket with a new one which will have adhesive on it.

I generally buy the iPhone 5s home button rubber gasket from eBay myself.

door

Voeg een opmerking toe

It is also possible that the aftermarket screen have a button hole that's is slightly larger than original screen.

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

Voeg je antwoord toe

Erik Brandt zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 13

Afgelopen 7 dagen: 61

Afgelopen 30 dagen: 271

Altijd: 20,164