Ga door naar hoofdinhoud

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Vragen Bekijk alle

Marks on display after separating glass

Hello

I have a question for people with more experience in LCD separation. Look at the picture in the second link below - there are several marks on a display of an iPhone 6 I have not encountered before, red line and dark spot.

The display was broken after a fall. Here is a picture before separation:

Block Image

http://imgur.com/a/Lmege

And here is a picture after separation:

Block Image

http://i.imgur.com/2uC0v37.png

There were none of those marks before glass separation so I am wondering if this could happen because of an unprofessional separation or is it possible that it just somehow was not visible before (with glass on a display)?

According to the technician words, the dark spot on the bottom right side marks a place when the display is a bit bent - which was not visible with the glass glued on top of the display.

Thank you in advance

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 2
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

Vertical red line looks like it is on the polariser film you have fitted (they have protective films you remove), along with the black/grey circles. The dark smear in the bottom right is probably where liquid has leaked into the backlight (when you were cleaning the glue), but it is difficult to tell from picture.

Was dit antwoord nuttig?

Score 5

4 opmerkingen:

So it means that the technician made possibly something wrong? I was not separating the display, this picture is the only one he sent me.

door

Yes. Tell him to remove the protective film from both sides of the polariser. Smudge is probably backlight panel, when he cleaned the glue it has leaked inside.

door

Thank you. Your explanation with leaked glue sounds more credible than his argument with a bent digitizer. Or is it possible that digitizer could bend after a drop? I believe it would break, not bend.

door

A bent digitiser won't cause that mark, it is where the liquid from cleaning the old glue has leaked into the right side. Most likely the digitiser would break anyway, like you have said

door

Voeg een opmerking toe

Voeg je antwoord toe

Mirek zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 141