Ga door naar hoofdinhoud

Released on September 19, 2014, this 5.5" screen iPhone is the larger version of the iPhone 6.

1500 Vragen Bekijk alle

iPhone won't stay in dfu mode long enough to restore?

When I put my iPhone in dfu mode, connect it to iTunes and start the restore process. It reboot it's self

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 16

Commentaar:

is this while you wait for the firmware to download?

door

my iphone died. Once i got to a charger, it kept going on and off. Im downloading firmware while my iphone is connected to PC but IPHONE SCREEN IS STILL BLACK. Will it go on once firmware is downloaded ? please help!

door

I know someone added a correct solved answer; but I have a way better + faster no download one.

ALSO I AM 4 YEARS LATE BUT THIS IS TO WHOEVER NEEDS IT

1. Enter DFU mode by holding ur power button+hold button then after 2 seconds let go of the power button but still hold your home button

2. THE MILLISECOND IT GOES DARK & IN DFU MODE go to itunes then click recover and accept the agreements whatever, (DO THIS AS FAST AS U CAN)

3. wait and wait and wait, and it'll work, IF THE APPLE LOGO POPS UP AND DFU MODE WONT STAY IN LONG ENOUGH FOLLOW THESE NEXT STEPS

4. REPEAT steps 1+2 and it'll slowly but surely work. just keep doing dfu mode even if the apple logo keeps popping up cuz progress will be made each time!!

Hope it works for you as well as it did for me~!

door

Voeg een opmerking toe

11 Antwoorden

Gekozen oplossing

1) download directly the official firmware

http://www.iclarified.com/750/where-to-d...

Remember where you saved this.

2) Put phone after you finished downloading into DFU mode, open iTunes, and i will ask you to restore.

3) On PC Hold SHIFT+ Click the restore button. On MAC, Hold OPTION + Click the Restore button.

4) Itunes will now let you choose an IPSW file. Choose the one you downloaded in Step1. Restore should then start.

Was dit antwoord nuttig?

Score 17

Commentaar:

Worked! Thanks!

door

Extracting Software still takes too long.

door

This doesn’t work for me. The phone disconnects/reboots and I get an error (9)

door

Worked perfectly! Thanks!

door

T'Saun Seaman you have hardware isssue

door

16 commentaren meer tonen

Voeg een opmerking toe

For some reason iPhones have an annoying habit of rebooting while you're waiting for the firmware file to download. Thankfully, you can download the firmware file through your browser and select it manually in iTunes, so the phone doesn't have to wait for iTunes to download 2.5+ GB.

Go to https://ipsw.me/ , locate your model and download the latest IPSW (Apple's iOS firmware file type). ipsw.me links to Apple's firmware servers, so the latest versions are digitally signed, which means you can use them in iTunes.

Put your phone into recovery mode and connect it to your computer. Cancel any dialog options asking if you want to restore or update until you are at the phone's landing page. There should be two buttons on the righthand side of the iTunes window marked "Check for updates" and "Restore iPhone..." On Mac, hold down the "alt/option" key while left-clicking on "Restore iPhone...", and you'll have the option to choose the firmware file you wish to restore with. On Windows, hold down the shift key while clicking "Restore iPhone..."

Select the firmware file you downloaded from ipsw.me and the phone should restore. Doing it this way allows you to download the file prior to putting your phone into recovery mode, so it won't timeout and reboot while iTunes is doing its thing.

Was dit antwoord nuttig?

Score 7

Commentaar:

wow thank you so much I finally unlock my iPhone because of your tip

door

Voeg een opmerking toe

Still won’t finish extraction on my iPad 6 wifi model, keeps rebooting midway to 95% to extraction finish.

Was dit antwoord nuttig?

Score 3

Commentaar:

You ever figure this out? I cannot get the phone to stay in recovery long enough to extract the file.

door

@greg_gorrell Use a faster/more powerful computer that can extract the firmware faster.

door

I use a 16gb ram 3ghz MacBook Pro and still iPhone refuses to stay in recovery mode. it keeps restarting. and gets stuck in the apple logo.

door

@Fixandinstall I use a 16gb ram 3ghz MacBook Pro and still iPhone refuses to stay in recovery mode. it keeps restarting. and gets stuck in the apple logo.

door

Voeg een opmerking toe

Thank god that actually worked. My iphone 6 while trying to update to ios 12 would go into recovery mode and not come out of it. Then i would get it into DFU only for it to reboot and turn on half way through while updating on itunes. I couldnt even force the update ota because the ‘checking for update’ would just spin and think but not freeze. This is the only option that has worked! Thank you and kudos to you!

Was dit antwoord nuttig?

Score 1

Commentaar:

I’m going through the same thing so I hope it works for me too!!

door

I'm having the same problem you mentioned. I don't get what you did that worked. My iPhone has been stuck in DFU mode for 7 hours and it's 2am. I downloaded the IOS 12 from OPs site as well as iTunes and both times I've waited about 30min for the iPhone to reboot in the middle of extracting or the middle of updating and it leads to either an "iPhone not found" error or "Error 9/14" on iTunes.

door

Voeg een opmerking toe

I have the ultimate answer to this problem. I could restore my iPhone, which was not even detected by iTunes yesterday. When the software is being downloaded in my case through Finder, before the time is up for the DFU mode and the phone exits the DFU mode simply press the home button+power button combination followed by the home button only so the phone restarts the DFU mode. That way you can prolong the amount of time your phone stays in DFU mode and when the download is completed, you are good to go.

Was dit antwoord nuttig?

Score 1

Commentaar:

Yes! when you reboot it on DFU mode and press casncel to that prompt with the options it continues downloading.

door

Voeg een opmerking toe

Extracting the software takes too long and the phone exits recovery mode

Was dit antwoord nuttig?

Score 0

Commentaar:

Just press the power button once and then volume up and then the volume down and then the home button every 2 minutes to keep it on until finish extract remember now you are not going to press and hold

door

This worked for me on iphone 6s. thank you !

door

@Tyler-Perry Director-Manager how can I do this on iPhone XR without no home button.

door

Voeg een opmerking toe

It didn’t work.

iPhone could not be restored. An unknown error occurred (32).

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Nothing worked for me. Stuck on trying to get my iPhone 6 plus on recovery mode doesn't stay neither on dfu mode.

Was dit antwoord nuttig?

Score 0

Commentaar:

check my answer, it may be your solution

door

Voeg een opmerking toe

Hi guys this way worked for me, just get an elastic band and use it to keep your volume down button in.

This way your phone will stay in dfu mode.

Was dit antwoord nuttig?

Score 0

Commentaar:

I am trying this right now, fingers crossed it works iPhone 6s

door

Extracting ^ not downloading, I’ve got it download already

door

Didn’t work

door

Voeg een opmerking toe

Drivers problems. Need to check if all drivers be installed.

May Apple Device Support is missing.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Ok, so I had this problem where my IPhone 7 would keep restarting while it was in recovery mode or it would simply not turn on after downloading firmware was complete. I suspected the issue to be with the battery, because the phone used to work perfectly and I hadnt known of a battery change ever, so I got a new battery from ifixit, popped it in, and went to restore the phone in itunes. The process went smoothly, and I had no issues. As the batteries get older they start to degrade and affects the IPhones functionality. Most issues like slow IPhone or random shutoffs, even itunes errors can be fixed with a battery replacement and its $30, so why not try it. If a battery replacement doesn’t help you with your issues, then your problem is on the logic board itself, either on the memory chip or somewhere else. For that issue, I would recommend looking up REWA technology on youtube and see what they do and try contacting them if they may be able to help because I know they have professional grade equipment where they are able to re-flash the IPhone’s nand memory, but im not too sure about that. Anyway, try a battery replacement and if it works, great, if not, we got a different problem on our hands. Good luck on your issue!!

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

desmondmettlenunoo zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 38

Afgelopen 7 dagen: 339

Afgelopen 30 dagen: 1,473

Altijd: 88,453