Ga door naar hoofdinhoud

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Vragen Bekijk alle

Camera not sharp after case replacement

I replaced the housing of my iPhone 6, now my back camera isnt focusing anymore.

So I thought I broke the camera, I replaced the camera with a new one but it is still the same issue.

The images are blurred, can anyone help me with this?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
1 Opmerking

I will open my phone tomorrow and let you guys know, thanks!

door

Voeg een opmerking toe

4 Antwoorden

Gekozen oplossing

I would check out the "lens" in the housing. It may be dirty or have a fingerprint on it. You will need to clean it with either a magic pen or some IPA and a clean q-tip.

Was dit antwoord nuttig?

Score 1

2 opmerkingen:

It is a custom housing and I believe it doesnt have a lens in the housing.

Could that be the problem?

door

If there was no lens, then it wouldn't be blurry unless it was the camera itself that was the issue.

door

Voeg een opmerking toe

Hi,

Custom or non original housings tend to have a low quality plastic lens.

This would need removing and replaced with a glass lens.

Or there may be dirt on the lens itself.

Was dit antwoord nuttig?

Score 1

2 opmerkingen:

Or a foil of protective nylon.

door

Or that also!

door

Voeg een opmerking toe

Cleaning the lens fixed the issue.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

If the lens is missing it causes a blurry picture.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Zackito zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 330