Repair guides and support information for EVGA tablets.

1011 Vragen Bekijk alle

HDMI stopped working on RCA tablet

i hooked my tablet up to my HMDI cable to my tv to watch movies threw the tv and now the HMDI cable is not working , when i plugit from my tablet i see on my tablet screen that it is connected but there is no picture showing threw the tv and i have the channel on the tv set to HDMi mode

Beantwoord! View the answer Dit probleem heb ik ook

Is dit een goede vraag?

Score 0

Commentaar:

Mine still didn't work.

Mine still didn't work.

door

Een opmerking toevoegen
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12

3 Antwoorden

Gekozen oplossing

Hi,

Have you checked that you have enabled the HDMI setting in the tablet?

You don't state the model number of the tablet so I'm taking a guess here.

Go to Settings > Device > Display > HDMI Settings and enable HDMI

Was dit antwoord nuttig?

Score 3

Commentaar:

I did that it still wouldn't display what was on the tablet to the TV

door

Hi,

What is the make and model number of your tablet?

Has the HDMI feature worked before OK on your tablet?

Have you checked that the TV is on the correct input?

Have you tried a new cable?

door

Een opmerking toevoegen

Same problem, no solution for several weeks until:

Then, by chance it started working. Reason: the connector to the tablet is semi-defective, and it just happened to be in the right place at the right time -- for a few minutes. After some jockeying around, got it to work again. (It's not the cable since it works well in another connection.) Seeing the micro card connection behind, I wondered: plugging in a card helps stabilize the connection.

So, at least in this case, it is a defective, poorly built tablet, but beyond the return date. I am worried about the stability of the connection and what to do if it fails completely.

Was dit antwoord nuttig?

Score 0
Een opmerking toevoegen

After some fiddling I finally got it to work, but since the video output has a different resolution than a standard TV, it’s pretty pointless.

Was dit antwoord nuttig?

Score 0
Een opmerking toevoegen

Voeg je antwoord toe

rekcurmik2002 zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 Uren: 3

Afgelopen 7 Dagen: 21

Afgelopen 30 Dagen: 131

Altijd: 1,906