Released September 25, 2015. Model A1687/A1634. Repair of this device is similar to previous generations, requiring screwdrivers and prying tools. Available as GSM or CDMA / 16, 64, or 128 GB / Silver, Gold, Space Gray, or Rose Gold options.

638 Vragen Bekijk alle

I replaced the charging port and it still won't charge

I replaced the charging port and it still wont charge. before the replacement I cleaned out the charging port with a q tip and a little isopropyl alcohol which made it so i could charge it only at a certin angle. any ideas?

Beantwoord! View the answer Dit probleem heb ik ook

Is dit een goede vraag?

Score 0

Commentaar:

what percent is the isopropyl alcohol

door

you make it sound like the alcohol got past the port and got on to something else like an exposed wire

door

I replaced it with another charging port and still no luck

door

Een opmerking toevoegen
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12

3 Antwoorden

Gekozen oplossing

A phone that wont charge could be caused by multiple things:

  1. A defective battery. The iPhone 6S is well know to suffer from battery issues, perhaps your 6S Plus has a similar problem.
  2. A defective charge port. While you replaced it, these small parts are notorious for poor quality and you may have gotten a bad one.
  3. Debris or oil residues inside the port (you cleaned it with IPA already).
  4. Defective Lightning cables and charging bricks. Always use genuine Apple cables and bricks when troubleshooting problems.
  5. Finally, a defective charge circuit on the logic board. This could be caused by water damage, impacts, poor quality (i.e. the cheap stuff) Lightning cables and charging bricks, especially the "automotive" ones.

The first 4 you can troubleshoot yourself and the last one requires a micro-soldering repair (not DIY).

Was dit antwoord nuttig?

Score 4
Een opmerking toevoegen

Have you tried another cable/plug?

It is possible to have a faulty charging port which you have bought. (I've gone through 3 in a row before!)

No debris in the connection from the port to the board.

Was dit antwoord nuttig?

Score 2
Een opmerking toevoegen

Replace tristar ic your problem will go ago.

Was dit antwoord nuttig?

Score 0
Een opmerking toevoegen

Voeg je antwoord toe

cobynew zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 4

Altijd: 176