Ga door naar hoofdinhoud

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Vragen Bekijk alle

iPhone 6 can't go pass the apple logo after proximity/front facing cam

Hey guys,

I have just replaced proximity/front facing camera flex but not phone does not go further then apple logo. But if I disconnect proximity/front facing camera flex it boots just fine. I have tried home+power but the problem remains. Is it bad proximity/front facing camera flex?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

3 Antwoorden

Gekozen oplossing

Try a new from camera cable and see if that works. These are often defective and can be damaged easily. Was this the original one or a replacement?

Was dit antwoord nuttig?

Score 3

2 opmerkingen:

It is a replacement. I am just worried if it is even possible to get it working if it is not original one? I will ask seller for replacement.

door

That is why. Replacements very, very, very often defective. Don't know why, but they are.

door

Voeg een opmerking toe

Possibly is a bad prox but try to plug in the prox while the device is powered on as well.

Was dit antwoord nuttig?

Score 0

1 Opmerking:

I have just tired that and when I go to camera app front camera shows black screen. If I restart the phone it continues with a boot loop.

door

Voeg een opmerking toe

dissconect the front cam and power on the phone if it boots in system try another front cam

Was dit antwoord nuttig?

Score 0

2 opmerkingen:

I have already mentioned that it boots if I disconnect proximity/front camera flex.

door

sorry i did't read that but don't try again to put that fron cam because it may damage the motherboard

door

Voeg een opmerking toe

Voeg je antwoord toe

Karolis zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 69