Ga door naar hoofdinhoud

Repair information, troubleshooting tips, and guides for the sixth iteration of Apple iPhone, announced on September 12, 2012. Model: A1428, A1429

2522 Vragen Bekijk alle

iPhone5 stuck when I install front camera and sensor cables to board.

Hello,

I broke my screen and I replaced the screen and digitizer 1 year ago. I replaced it. It worked fine until last week. My phone's battery was swollen. So I bought a battery and install, it was simple.

When I tried to power up, it stuck at Apple logo. I worried and try to restore from iTunes. It gave error 4005, 4013, 4014... I searched and found some videos, explain the reason may be some defective components.

I started to disconnect connectors one by one, and bingo, it was front facing camera + ear speaker + prox sensor.

When I try while that connector disassembled, it powers up successfully. When I re connect the connector, it stuck.

Before replacing the battery, everthing works fine. I switched to old battery but didn't solve for camera and ear speaker problem.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

3 Antwoorden

Gekozen oplossing

Replace the front camera ribbon cable assembly. It has gone bad.

Guide to replace:

iPhone 5 Front-Facing Camera and Sensor Cable Replacement

Where to get part:

iPhone 5 Front Camera and Sensor Cable

iPhone 5 Front Camera and Sensor Cable Afbeelding

Product

iPhone 5 Front Camera and Sensor Cable

$4.99

Was dit antwoord nuttig?

Score 4

3 opmerkingen:

Will it be the definitive solution? Is it a guess or fact?

door

I can't answer that unless i have the device in front of me.

door

'When I try while that connector disassembled, it powers up successfully. When I re connect the connector, it stuck.'

What else would it be really?

door

Voeg een opmerking toe

Yes you have to replace the front camera ribbon cable assembly, then only it will work bcoz once i replace the display by mistakely the front camera cable was got damaged and i start connect all the connectors the device was stuck and i replace the front camera cable assembly it worked for me, So pls try it

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

I bought a new camera ribbon cable assembly.

I will try tonight and let you know the result soon.

Thanks.

Was dit antwoord nuttig?

Score 0

2 opmerkingen:

It worked. I replaced the full front camera ribbon cable and works fine.

door

Great you did it nicely

door

Voeg een opmerking toe

Voeg je antwoord toe

Cagdas zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 58