Ga door naar hoofdinhoud

Complete repair manual for the PSP Go, including battery upgrade and display repair instructions.

89 Vragen Bekijk alle

After reassembling my PSP Go the Start & Select buttons won't work

After i disassembled and rereassembled my PSP Go to fix my power switch; i used the PSP Go Teardown guide from this website, and now both the Start & Select buttons won't work anymore; and they were working before then.

so i tried taking my psp go apart and putting it back together again while going over the teardown guide thinking i over looked something, anyone have an idea of what that might be?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 3
1 Opmerking

This is how you replace it. https://imgur.com/gallery/JRRsJku

door

Voeg een opmerking toe

3 Antwoorden

Gekozen oplossing

Look at the 2nd picture of step 9 in the PSP Go teardown. There is a cable that connects the buttons to the main board, it could be loose.

Was dit antwoord nuttig?

Score 3

2 opmerkingen:

Here's a direct link to the page Aram is mentioning. PSP Go Teardown

door

thanks man, that's exactly what the issue was, i didn't see that cable cause it was hidden by joystick's ribbon cable.

door

Voeg een opmerking toe

I have the same issue, except my cable is in. Any ideas? I just had sound issue which was caused by bad fuse, which i replaced and now works but SELECT/START button doesn't

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

It comes out from the front. First detach from the motherboard and then take it out from the front. The Start/Select buttons are sticked on.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

joel c zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 7

Afgelopen 30 dagen: 19

Altijd: 6,149