Ga door naar hoofdinhoud

Repair information and guides for the iPhone 6S released by Apple on September 25, 2015. Models: A1688, A1633

2683 Vragen Bekijk alle

iPhone 6S home button "sticking" after screen replacement

Hey All!

So I have a peculiar problem, been looking through the forum but I haven't found one like this. So I through another screen on my iPhone 6S- the Touch ID is functioning (thank God) but when I tighten the pentalope screws the home button "sticks" I can barely depress it. Everything else is great! But that is super annoying, if I loosen the screws I can press the button, but that's no good because they will eventually fall out.

Any ideas out there? Thanks!

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

Bend the home button Metal plate away from the home button. E.g I think it's called concaved.

The middle part of the metal plate needs to be further away from the home button.

That should fix it as I have been doing it for 5 and 6 series.

Was dit antwoord nuttig?

Score 4

4 opmerkingen:

Thanks!- are we talking the plate that shield the button? Like the one that you screw over it?

door

Worked like a charge- genius!

door

Clarification for others:

The metal plate behind the homes button that is held by 3 screws.

door

It worked. Thank you Ben :)

door

Voeg een opmerking toe

Thanks I can’t believe I never thought to bend the bracket to correspond with non oem parts

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Trevor Mecaskey zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 3,704