Ga door naar hoofdinhoud

Looking for a samsung Galaxy Tab E 8.0 digitizer.

I have a Samsung Galaxy Tab E 8.0 SM-T377V in the color black that has some light scratches on the front of the touch screen glass. I am looking for a replacement digitizer but am not able to locate the part. I have tried amazon, ebay, and Google and have only come up with the LCD which as far as I can see is functioning perfectly. Any one know of a parts vendor that I can contact for a replacement?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Voeg een opmerking toe

3 Antwoorden

Gekozen oplossing

The digitizers just went up on ebay. They are about 40.00. Just do a search for galaxy tab e 8.0 screen replacement. They are all from China so it takes a bit to recieve, but at least they are available. I just ordered one.

Was dit antwoord nuttig?

Score 0

1 Opmerking:

Yeah those are the ones. Going to order 1 myself. Not sure why there was not any now there is a few sellers.

door

Voeg een opmerking toe
Het nuttigste antwoord

The part is here:

http://www.ebay.com/itm/like/36140820898...

Was dit antwoord nuttig?

Score 1

11 opmerkingen:

The link you have listed is for the 310 series and that is a Tab 3. I'm looking for a digitizer for a Tab E 377v series. There are generally differences with the pin out on the ribbon cable connector. Buying that and installing it could damage the connector on the logic board and /or lead to a purchase that can not be used at all.

door

I'm looking for the same part can someone give me any suggestion

door

Incorrect, as I said above twice I need the digitizer not the LCD. The LCD is the liquid crystal display. That component produces the image that we see. The digitizer is a separate part being the top glass that transmits touch signals through the ribbon cable to the logic board.

Again I only need the top glass or aka digitizer.

door

Have you actually asked the seller if the digitizer and display are 2 pieces or one?

door

6 commentaren meer tonen

Voeg een opmerking toe

Hi,

Have you thought of this option?

It only says that the LCD is broken - not working, nothing regarding the digitizer, which looks undamaged. That doesn't mean it works of course. Perhaps contacting them might be useful.

http://www.ebay.com/itm/Samsung-Galaxy-T...

Was dit antwoord nuttig?

Score 1

9 opmerkingen:

I thought about that but then you run into the adhesive problem. New digitizers have (generally) a precut adhesive on the inside. I don't think there is a way to remove the LCD from the backside as the LCD drops into the midframe lining up in the preset channel. If I took the digitizer off naturally you run a risk of damage and the adhesive is ruined. The digitizer on my tablet is not bad it works flawlessly but has a few light scuffs. As a perfectionist it bothers me, so I am now questing for a new digitizer to restore it to a factory like new condition.

door

did you find this part?

door

No I have not. I can't seem to find a vendor that has a new digitizer. I contacted a store on ebay and they added me to a list. I guess that will be a when and if they get them type thing.

door

Are you replacing the digitizer simply for cosmetic reasons? If so, most light scratches visually disappear when you apply a screen protector.

door

The scratches are deep enough for a finger nail to catch on if dragged over. Yes it is cosmetic because it is still 100% functional but again I know that they are there and it bugs me.

door

4 commentaren meer tonen

Voeg een opmerking toe

Voeg je antwoord toe

Kari zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 2,612