Ga door naar hoofdinhoud

Repair information and guides for the Apple iPhone 5c that was announced on September 10, 2013. Model: A1532, A1456

1233 Vragen Bekijk alle

Using the iSlack doesn't pry up the digitizer with it

I want to replace my dumb iPhone 5c's battery. I pry up the screen using the iSclack, but only the screen comes up with it, and not the digitizer. It seems like Apple didn't glue the digitizer properly, since my phone is a little pried up from the top ever since I bought it.

What can I do to remove the digitizer along with the screen?

Block Image

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
1 Opmerking

Did you remove the screws from the bottom of the case as mentioned below It wont come out if you dont

door

Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

The 5C doesn't have a home button cable, attached to the Lightning dock. Honestly I never use a suction cup anymore. The spudger is a good tool, or you can use a flat head screw driver. Make sure to pry from the bottom right, so as not to disturb the two gold pins, on the Lightning dock

Was dit antwoord nuttig?

Score 4
Voeg een opmerking toe

You Probably Have Screen Separation Witch Is Screen Defect Or User Error It Should Come Off As One Just Be Carful Not To Rip Home Button Cable

Was dit antwoord nuttig?

Score 0

8 opmerkingen:

You Kinda Just Got To Play Around With It Do You Have Picture Of It

door

Spudger

Good Tool For Getting Screen And LCD Off

door

I'll edit my question

door

I edited my question with the image

door

Did You Take Out The Penelope Screws At The Bottom By The Charging Port?

door

3 commentaren meer tonen

Voeg een opmerking toe

Voeg je antwoord toe

Developer Ali zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 1

Altijd: 130