My Sony ICFC1 alarm clock has been continuously flashing between the time and "OFF" on the display. Also, the buttons on the back to set time do not correspond with one another.
why would my clock flash this way, also flashes cycle of date as if setting time and has been keeping incorrect time.
Is dit een goede vraag?
Rep: 448,9k
11
366
1,4k
Hi,
Try a power reset and see if this resolves the problem.
Turn off the AC power to the clock.
Remove the coin cell backup battery from the clock.
Press and hold the Enter/Time Set button for 10 seconds and then release.
Reinsert the coin cell battery and then switch on the AC power and see if you can adjust the time etc.
Here is a link to the user guide for your clock/radio which shows how to remove the coin cell battery. Ensure that you insert it back into its' holder the correct way if it happens to become dislodged when out of the clock.
Was dit antwoord nuttig?
Afgelopen 24 uren: 1
Afgelopen 7 dagen: 14
Afgelopen 30 dagen: 49
Altijd: 7,299
4 opmerkingen
my guess the battery needs replacement????????????????
door thomasblazier
Tried everything suggested and nothing works. All I want is the correct time.
door Rich Raybourne
Just purchased cube clock radio. Can't get time set to am. No matter what time i set its pm!
door Ann Hearn
@Ann Hearn
What is the make and model number of the clock if it is not a Sony ICF-C1T?
door jayeff