Ga door naar hoofdinhoud

Repair information and guides for the iPhone 6S released by Apple on September 25, 2015. Models: A1688, A1633

2682 Vragen Bekijk alle

Replaced full screen assembly now Touch-ID doesn't work

Recently replaced my screen along with the LCD screen, I took the original home-button and the backplate with the home-button cable and installed it. Went into settings and tried to set a Touch-ID and the error message "Failed Unable to complete Touch ID setup. Please go back and try again." I've tried all software related fixes that I could find on the webs but nothing worked. Please help!

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 2
Voeg een opmerking toe

2 Antwoorden

Het nuttigste antwoord

This seems to be a hardware issue, not a software issue. Did you make sure the connections were tight?

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

Are You working on a 6 or 6S? The 6 has the home button ribbon attached to the backplate which can easily get damaged. That can be replaced. If you damaged the home button than you are out of luck. If it's a 6S the home button ribbon is built into the screen and if that's damaged than you need another screen.

Was dit antwoord nuttig?

Score 0

1 Opmerking:

I took the original thingy that the home button cable was attached to, homebutton is also original and sits in my phone still.

door

Voeg een opmerking toe

Voeg je antwoord toe

bamsemcpro zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 137