Ga door naar hoofdinhoud

Repair information and guides for the iPhone 6S released by Apple on September 25, 2015. Models: A1688, A1633

2683 Vragen Bekijk alle

iPhone 6s screen flickers after display replacement

I've repaired a couple iPhone 6s now, and a lot of the time the new screen flickers around the edges. Any ideas what's causing that?

I feel like it's something I'm doing, because I haven't found anyone reporting any issues on it. I would say 5 out of 6 6s repairs that I have done, seem to do this. Last one I did, the issue went away on it's own, but it's just a pain that it seems to happen every time I do this repair.

Any ideas why this happens?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 3
2 opmerkingen

Was the battery unplugged during the screen replacements? Have you tried turning the phone off and on repeatedly?

door

Can you post a pic? That does sound weird.

door

Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

This happens all the time and is nothing to worry about it. I call it the static screen funness. Basically if you don't actually power the phone down and disconnect battery before installing or removing a screen this can happen. It will almost always go away on its own in about 1 hour. Sometimes leaving the phone off helps it go away quicker. Trust me nothing to worry about.

Was dit antwoord nuttig?

Score 7

1 Opmerking:

Hi

We should disconnect the battery and wait or all connector must be connected during that?

door

Voeg een opmerking toe

Try to replace a new screen, first of all you must tested before you move camera, finger etc. Make sure all safe and work before move it

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

patrickyoung1018 zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 15,375