Ga door naar hoofdinhoud

The wi-fi only version of Apple's iPad Air, model number A1474. Available in Space Gray or Silver, it packs the custom A7 processor and ships in 16, 32, 64, and 128 GB configurations.

299 Vragen Bekijk alle

I need a display cable bracket

I am repairing an iPad Air 1st Gen and have found that a previous repair shop did not replace the display cable bracket shown in step 37 for this guide:

iPad Air Wi-Fi Front Panel Assembly Replacement

I have spent several weeks on the internet trying to find the price with now luck. I've lost 8 bids on eBay auctions trying to get an iPad for-parts. At this point, I'm looking to manufacture a facsimile of the part out of a small aluminum plate. Before I do that, I thought I would ask this community.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
6 opmerkingen

You can put like something else above it to act as a metal plate to keep it in place as well, you know that right?

door

But what could you put? I'm in the same idiotic predicament!

door

I'm perplexed at the fact no one manufactures this stupid plate anywhere...

door

I ended up fabricating one from flashing I purchased at Home Depot.

door

What is flashing? And how'd you do it?

door

1 commentaar meer tonen

Voeg een opmerking toe

1 Antwoord

Het nuttigste antwoord

I believe that bracket really is only there to keep the cable in place. If you are having trouble finding the part honestly I would either look for the same generation iPad in not working condition on ebay or another auction site or just drill small holed in any small piece of metal to save some money.

Was dit antwoord nuttig?

Score 2

1 Opmerking:

Good suggestion, you could use a old shield form pretty much any donor board and cut to size.

door

Voeg een opmerking toe

Voeg je antwoord toe

gwarren zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 189