Ga door naar hoofdinhoud

Repair guides and support for smaller headsets that rest on top of the ear, also known as supra-aural headphones.

60 Vragen Bekijk alle

Can I solder broken wire back on using the old solder blob?

Hi! My headphones broke on one side. I can see the broken wire inside the ear cup and was wondering if I could just melt the solder that's there and push the wire back in. (after snipping the wire). I've never soldered before and don't know much about electronics.

Here's a picture, you can see where the wire's all broken.

Block Image

https://postimg.org/image/6fcajabhl/

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

Christian, as Shelton stated could be possible, but if you want a good clean trouble free repair at least get a little flux/rosin cored solder so you will have a clean soldered connection, saves from having to do it twice.

A small amount of rosin core solder can be purchased at most electronics stores and big box stores as well.

Below I will post a tutorial on soldering. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

https://www.youtube.com/watch?v=Qps9woUG...

Was dit antwoord nuttig?

Score 3
Voeg een opmerking toe

Should be possible, your picture isn't the clearest though. Before of your temp when soldering you don't want to melt anything. Maybe watch a few basic videos on youtube before you try.

Was dit antwoord nuttig?

Score 2
Voeg een opmerking toe

Voeg je antwoord toe

Christian zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 6

Afgelopen 30 dagen: 17

Altijd: 3,160