Ga door naar hoofdinhoud

Model A1224 / Mid 2007 and Early 2008 / 2, 2.4, or 2.66 GHz Core 2 Duo processor

548 Vragen Bekijk alle

Won't Turn On Power UP

I can see the Diagnostic Leds, and

Number 1 : It's On when connect the AC Cable

When I push the start button the Leds 2 and 3 turn ON

No 2: ON

No 3: ON

But the LED 4 do not. Still OFF. And the Fans not working, some advice about it?

The SMC was reset and nothing happens.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score -1
Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

See this

previous post from Mayer

Remember to return and mark accepted the answer that best solves your problem.

Good luck,

N

Was dit antwoord nuttig?

Score 2

2 opmerkingen:

good advice in that post +

door

+ excellent source

door

Voeg een opmerking toe

LED #4

Indicates that the computer and the LCD display panel are communicating. This LED will be ON when the computer is turned on and video signal is being generated. If the LED is ON and there is no image on the LCD display panel, the LCD display panel or inverter might be installed incorrectly or need replacement.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Soptec zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 1,804