Ga door naar hoofdinhoud

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Vragen Bekijk alle

After Replacing Proximity Sensor, the Front Camera Becomes Blurry

I replaced my iPhone 6 front screen and the proximity sensor stopped working. After that, I tried changing my proximity sensor with a new one, which replaces the front camera as well. However, after changing it, everything works fine except that the front camera is blurry and unable to focus.

Are there smudges on the lens of the camera? Or did I not position it correctly in the camera socket?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

Yo should be able to look at the hole in the top of the screen where the camera sits to see if there is a smudge obscuring the camera, if there is then clean it with isopropyl alcohol and a cotton bud. If there isn't anything up there then the front camera may be faulty.

Was dit antwoord nuttig?

Score 2
Voeg een opmerking toe

Voeg je antwoord toe

Kelvin zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 499