High performance tablet computer released by Apple on November 11, 2015. Model A1584.

54 Vragen Bekijk alle

Apple Pencil not working after screen replacement

Hi,

I've replaced a cracked lcd/digitizer assembly on an iPad Pro 12.9" device and the client says the apple pencil doesnt work with the new screen.

Anyone else experience the same fault?

Beantwoord! View the answer Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Een opmerking toevoegen
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12

3 Antwoorden

Gekozen oplossing

The Problem was a faulty screen, replaced the screen with a new one and pencil is working perfect.

Was dit antwoord nuttig?

Score 3
Een opmerking toevoegen

have you tried re-pairing it? I assume each screen has a unique identifier in it. It would kinda, almost make sense that re-pairing would fix it.

Was dit antwoord nuttig?

Score 0

Commentaar:

The client informed us the pen doesn't work, however it does but there dead zones on certain areas on the screen.

I'm going to try a new screen, will update when done.

door

Een opmerking toevoegen

Installed a new digitizer and everything tested fine. During final assembly, backlight connector came off daughter board. Didn't realize this until it booted up. Thought a backlight chip maybe had been fried. Relieved to see that it was just a connector. After powering off and rechecking all connections. Started the unit up and now zero touch. Solder job was perfect. At a loss as to what the issue is now. Very little information out there on this.

Was dit antwoord nuttig?

Score 0

Commentaar:

Jeff were you able to solve this? Same thing happened to me. Bad screen maybe ?

door

Een opmerking toevoegen

Voeg je antwoord toe

Ryan Veldsman zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 10

Afgelopen 30 Dagen: 61

Altijd: 1,487