Ga door naar hoofdinhoud

Fix Your Stuff

Right to Repair

Parts & Tools

Released September 25, 2015. Model A1688/A1633. Repair of this device is similar to previous generations, requiring screwdrivers and prying tools. Available as GSM or CDMA / 16, 64, or 128 GB / Silver, Gold, Space Gray, or Rose Gold options.

2169 Vragen Bekijk alle

Water line inside my phone screen

Day before yesterday, my phone fell into toilet. Of course i get so scared, grabbed it out very fast removed a lot of water from headphone and charger jack. And my phone is working, no problems with it. but yesterday I saw in the left lower corner little water mark I putted phone in rice for all night , and this morning I see straight line from left lower corner to right corner in the top. Could be that it is straight water line? Or my screen is damaged and I can not fix it myself?

Thanks

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0

Commentaar:

Could you post a picture. That would help us identify the problem.

door

I got water inside my headphone jack and charger jack and now from my right corner of my screen all the way to the top mid right corner is a long water mark streak and my phone will not let me turn it off or lock it to where my lock screen will come up what do I do because I have a ZTE Blade Max and the back of the phone is actually not ment to come off what do I do

door

Voeg een opmerking toe

3 Antwoorden

gabrieletera before you do anything else, and if you like your phone then you want to stop using it right now. Stop syncing/charging it and stop turning it on. You have water damage and rice does not do anything.Rice is not a tool and using it, is the equivalent of not doing anything. Check on here for more on that.

What you do want to do is to properly clean your phone. Disassemble your phone using these guides . You must remove all EMI shields. If you do not remove those, you might as well not do anything. After you removed those, clean the whole board, connectors and all with +90% isopropyl alcohol. Follow this guide , and even so it was written for a 3G all the points are still pertinent to your phone. While you clean your board, check for any obvious damage, like burned or missing components etc. When it is properly cleaned, replace the battery. All these steps are to avoid delayed failure caused by corrosion. Best thing to do would be to clean it with an ultrasonic cleaner, but if you do not have access to one, this will at least help. Once all this is done, reassemble your phone and reevaluate. Until it is cleaned, everything will only be a guess. Even with all this, water damage has only a small chance to be fully repaired, but at least you can give it a try. From your description it is possible that this is just your display, but it could also be water damage on the logicboard that causes it.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

That straight line is moisture. I do OCA repairs and when I put it in the autoclave to remove all bubbles I get these lines from moisture in the autoclave. They disappear in a day or so

If it doesn't dissapear then you would need to change the rear backlight and possibly the rear polarizer.

If it is the rear polarizer then I would avoid trying to do it if you don't have the machines etc to do so.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

I had that on one of my old phones after I went on a trip and dropped it in water. I think disappeared in about a week or so

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

gabrieletera zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 3

Afgelopen 7 dagen: 47

Afgelopen 30 dagen: 182

Altijd: 8,990