Ga door naar hoofdinhoud

Repair information and guides for the Apple iPhone 5s that was announced on September 10, 2013. Model: A1533, A1453, A1457, A1528, A1530, A1518

3530 Vragen Bekijk alle

Unable to unscrew 1.2mm and 1.3mm Philips #000 screw.

I have the Philips #000 screwdriver from iFixit.

However, I seem to only be able to unscrew the 1.7mm screws. No luck with the smaller 1.2mm and 1.3mm screws. I am currently at this step.

Is this the expected scenario ?

Thanks in advance :)

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

Have you tried a little bigger driver? I normally use a 00 driver on iPhones.

Was dit antwoord nuttig?

Score 3

5 opmerkingen:

Dang, I do not own a #00 driver. Will try to obtain one and see if it works.

door

Thanks for the info, I've been using #0 Phillips head on iPhones which is probably not optimal.

door

I got the screws out, used a screwdriver that I borrowed from a friend. Kinda disappointing that the ifixit screwdriver does not work..

door

Yeah sometimes I have to use the german phillips head screw driver that pretty much never gets worn out and works for philips head phone screws that are hard to take out.

door

i am having the same problem. Which screw driver did you get from your friend?

door

Voeg een opmerking toe

Voeg je antwoord toe

Daylen zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 4

Altijd: 2,590