Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Repair guides and support for your LG TV.

858 Vragen Bekijk alle

HDMI input on my 4k LG not working

LG flat screen 55uf645

My inputs

Is not working it said check I puts

Update (08/30/2016)

Yes tried all HDMI ports 4k only works on hdmi1

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0

Commentaar:

Hi,

Can you prove that the device(s) that you wish to connect to your TV using a HDMI connection are working via HDMI by connecting to another TV? Have you tried using a different HDMI cable? have you tried all the HDMI connections on your TV?

door

yes used different TV, New HDMI cable, tries ALL three HDMI ports

door

can HDMI board be replaced

door

Voeg een opmerking toe

Nintendo Switch-kits

Een snelle oplossing die je weer mee laat doen

Koop Switchkits

Nintendo Switch-kits

Een snelle oplossing die je weer mee laat doen

Koop Switchkits

3 Antwoorden

Het nuttigste antwoord

Try removing all HDMI cables and then "remove" the power cord for about 10 minutes (powering off is not sufficient ). Then Plug in the power cord, then one HDMI cable and try your device that way.

Also, something to note there is a known flaw with these tv's that cause a spike on the motherboard that cause the HDMI ports to stop working altogether.

http://www.lg.com/us/tvs/lg-55UF6450-4k-...

Look under ratings and reviews.

Hopefully the reset will get you backup and running though.

The board replacement is not hard either though.

Was dit antwoord nuttig?

Score 2

Commentaar:

Thanks, the powering off for a few mins worked.

door

Voeg een opmerking toe

Hello there!

If after trying what Henry suggested to do, the HDMI inputs are still not working on your TV, then you need to replace your Main Digital Board.

If your Tv model code is 55UF6450-UA.AUSYLJR, then the part number for the main board you need to replace is EBT64048902

Good Luck!

Mike W

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

The solution sounds crazy but remove the main board and bake it in the oven to allow the weak solder joints to reflow, it will normally last about a year or two depending on use, when they go out again, repeat.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

red6424 zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 7

Afgelopen 7 dagen: 91

Afgelopen 30 dagen: 347

Altijd: 27,633