Ga door naar hoofdinhoud

Repair information, troubleshooting tips, and guides for the sixth iteration of Apple iPhone, announced on September 12, 2012. Model: A1428, A1429

2521 Vragen Bekijk alle

iPhone gets hot after Camera Replacement

Hey Guys,

I recently replace by back camera, after putting it all together the iPhone heats up when started.

Some facts:

- hot spot is the top right corner of the back

- no heating during boot or while in lock screen (even if the display stays on the whole time)

- heats up during usage in unlocked state

- when switching to standby it cools down again

- when charging the phone, it heats up, even when I completely disconnect the display

Do you may have an idea what could cause this issue? Thanks in advance!! :)

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

A faulty camera could probably cause this. Try with another one and see if the issue persists.

Was dit antwoord nuttig?

Score 0

2 opmerkingen:

Thanks for the fast answer. I installed the new camera and the original one, the issue still persists.

door

That's odd. Could you have damaged the logic board when replacing it the first time?

door

Voeg een opmerking toe

Voeg je antwoord toe

albertschulz zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 85